Operating rules for the transportation of gas from gas producer:
1. First open the flue valve of heating equipment, and then open the gas valve and air valve to be ignited.Open a burner first.
2, open the gas stove water seal, let the gas into the heating furnace.
3. When the gas comes out of the burner, put the torch into the burner of the heating furnace for ignition.If a ignition is not, the exhaust gas must be removed before the air, one by one burner ignition.
4. After the burner is on fire, start the fan for air combustion.
5. According to the technological requirements of heating equipment, adjust the gas quantity and air quantity to make the temperature reach the technological requirements.
Water seal is an important accessory equipment of gas producer.
1, the ash basin to maintain a certain water level, when the load from small to large, part of the liquid seal water will flow away from the basin, if not timely to the ash basin water, pressure changes, its liquid seal capacity will not meet the requirements, so when the load changes, to observe, timely supply
2. Adequate water must be added to the ash basin, gasification room and bottom water sealing tank to ensure its water sealing capacity
3, the evaporation room water seal overflow of the water can guarantee the water seal water level at the bottom of the furnace, the key point is every shift to dig ash once to prevent ash storage, blocking the blast pipe.
4, vaporization chamber water seal capacity is small, in the grate under evaporation fast, less than the water will cause water seal breakthrough, usually to keep the water level overflow, in order to prevent ash into the liquid seal, to regularly wash with a lot of water.
The company has long been engaged in the design, manufacture, installation, commissioning and other technical services of gas generator and two-stage gas generator.Interested contact!Tel: 86-13676907460 email: firstname.lastname@example.org